Howl-o-ween DIY: Crafting a Werewolf Gnome for Your Home! (Free Pattern)

With Halloween approaching, it’s the perfect time to embrace your crafty side and conjure up some spooky magic with a DIY Halloween Werewolf Gnome!

This enchanting project combines the mystical allure of werewolves with the charm of garden gnomes, making it an ideal decoration for the spooky season. Get ready to bring a howling good time to your home as we guide you through the steps of creating your very own Halloween-themed werewolf gnome.

So, gather your materials and prepare for a crafting adventure that will leave your guests howling with delight!

Gathering Supplies to Make Your Own Gnomes

Materials Needed

• One foam cone 10.8cm x 5.6cm high for the body- These usually come in packets of 6
• One foam egg approx. 5cm x 3.5cm for the shoes-cut in half lengthwise
• Pantyhose- colour of your choice. 13 x squares roughly 5cms x 5cms
• Fibre fill or something similar
• 13 x small silicone bands
• 1 x clear plastic straw
• I x 15cm long stick cut in half into 2 x 7.5cm legs
• Some brown paint for the nails and cream or white for the teeth if you are adding teeth
• 2 x toothpicks or something similar for some teeth (Optional)
• Material: A soft felt is best as it can be manipulated and doesn’t fray in your choice of colour 30cm x 60cm
• In felt- 2 x leg pieces 6cm x 4.5cm, 2 x arm pieces 7cm x 5cm, 1 x body piece 12cm x 18cm, 1 x body base 7.5cm x 7.5cm, 1 hat 20cm x 18cm, 2 x feet bases 7cm x 6cm and some scrape for the inside of the ears x 2
• Fur Fabric of your choice 20cm x 30 cm
• 1 x beard 6cm x 6cm, 2 x lower arms 5cm x 4.5cm, 2 x top of the feet 8cm x 6.5cm and scrap for the outside of the ears.

Tools Needed

• Hot glue gun
• Craft knife
• Scissors

Step-by-Step Guide: How to Create a Halloween Werewolf Gnome

Step 1: Nose, Fingers, and Toes

1. To make the nose, use a square of pantyhose and push in some fibrefill to form a ball shape.
2. Twist the pantyhose and wrap around a small silicone band to finish it off. This will be the nose.
3. Repeat the process to make 6 toes and 6 fingers, ensuring they are smaller than the nose.
4. Cut the plastic straw into diagonal pieces to create sharp claws.
5. Glue a nail on each finger and toe, then paint them with a darker color for visibility.

Step 2: Feet and Legs

6. Using the felt material, start the leg by folding up a cuff on the narrow end and lay the stick on the material, with the cuff at one end of the stick.
7. Make sure the stick is in the middle and there is some bare stick at each end. One end will get glued into the Werewolf’s bottom, and the other end will get glued into the foot (the cuff end).
8. Roll up the material, gluing as you go, to form the leg. Be cautious with glue if using black felt, as it can easily be seen on this color.
9. Cut the foam egg in half length-wise to make 2 feet, using a bread knife or a craft knife (adult supervision required).
10. Glue the fur on the curved side of the egg, ensuring the fur runs from the rounded end to the narrower end.
11. Cut off any excess material where the fur runs away from the leg end.
12. Glue the base of the foot on, using felt material, then cut off any excess material.
13. Brush the fur forward and work out where to stick your toes. They should be close to the edge at the front.
14. Pull up some fur and glue in the 3 toes, making sure they are next to each other and sitting with the nail on top.
15. Put some more glue on the back of the toes, covering the silicone bands and excess pantyhose. Pull the fur down and forward to cover the glue, etc. and push some fur between the toes.
16. Decide where you want the leg to go in on the opposite side of the toes, make a hole with some scissors, add glue, and push in the leg with the cuff end on the foot. Ensure the seam of the leg is in the middle so it can’t be seen.
17. Repeat the process for the other leg.

Step 3: Hands

18. Using the felt material, make the arm by folding up a cuff on the narrow end and gluing it down.
19. Glue the cuff end onto the top of the lower fur arm, ensuring the cuff is on the same side as the fur.
20. Flip over and glue down one side (the long side) and fold down about halfway. Repeat on the other side.
21. Turn over and work out where the fingers will go in the fur. They should go closer to the end.
22. Pull up some fur on the top and glue the fingers in next to each other, with the nails on the top. Then repeat the process.

Step 4: Body, Nose, and Beard

23. Glue the foam cone onto the material square at the base and cut off the excess material.
24. Get the biggest felt piece and start wrapping the material around the bottom/base of the cone, gluing as you go. Ensure you get more and more material on the bottom side as you continue to wrap. Cut off any extra material hanging below the bottom.
25. Don’t worry about covering the peak of the cone, as it will be hidden by the hat. Trim off the excess material in a straight line, as the nose and the beard will cover this spot.
26. Decide where you want your nose (in the center is the best place) and glue it on.
27. Get your beard/fur and cut a small slit at the top, approximately 2.5cm long, to go around the nose.
28. Put some glue around the nose and position the beard in the right spot by pulling the fur up and around the nose.
29. Glue down the sides and bottom of the beard. If it looks untidy anywhere around the nose, add a little more glue and push the nose down to cover those bits.

Step 5: Hat and Ears

30. Use the ear pattern to cut out the fur ears.
31. Glue the ear onto any felt scrap you have, trim off any excess, and add a little glue to the bottom.
32. Fold over the bottom corners to form an ear shape, then repeat for the other ear.
33. Glue along the long side of the hat material (felt) fold in half and stick down to form a peak. Trim off some of the material at the bottom/back of the hat to make it more rounded.
34. Sit the hat on the body part of your gnome and work out where you want the ears to sit. Glue each ear on, ensuring the ends are covered.
35. Take the hat off and turn the bottom edge up to make a cuff edge, matching the arms and legs. Glue it down, making sure the ends of the ears are covered.

Step 6: Putting it All Together

36. Decide the direction you want the feet to go in. Sit them in front of you, toes towards you, and put a little dob of paint on the top of the legs.
37. With the front facing you, hold the body of your gnome over the legs (about the middle) and push down, transferring the paint to the bottom of the gnome body.
38. Make a hole where the paint is, put some glue in the hole, and push in the leg, making sure there is no raw stick showing. Remember, the cuff is not at the top!
39. Repeat for the other leg and then ensure the gnome is sitting flat on the ground and not wobbly.
40. Glue the arms on each side, making sure they are even.
41. Don’t put the arms too far down, as the hat will need to cover the cut end.
42. Put some glue around the top of the nose and around the back, then put on the hat, pushing it down so that it touches the nose in the front.
43. If you wish, you can now add some teeth (optional).
44. Paint some pointy sticks (like toothpicks) cream or white, and cut them to the size you want.
45. Lift up the fur around the mouth area and glue the teeth on each side, flaring out to the side slightly.
46. Pull down the fur so that the teeth just poke through.

Step 7: Congratulations!

Congratulations on crafting your very own Halloween Werewolf Gnome! Give your creation a unique name or create a family of Werewolves to join in the Halloween festivities. Enjoy the howling fun this spooky season! 🎃🐺

Free Pattern Download

If you’re eager to get started, I have a special offer for you. You can download the detailed written instructions along with the pattern for free, allowing you to have them handy as you embark on your werewolf gnome-making adventure. Simply click the link below to access your free instructions and begin crafting your own hairy werewolf gnome masterpiece.

For those who prefer a more immersive learning experience, I’ve also created a comprehensive video tutorial that guides you through each step in detail. The video provides visual demonstrations and additional tips to ensure your werewolf gnome turns out just the way you envision. You can download the video tutorial below for a one-time fee of $7.99 USD.

Conclusion

With Halloween just around the corner, we’ve successfully crafted our very own Halloween Werewolf Gnome. Each step of this enchanting journey allowed us to bring this captivating creature to life, blending the charm of garden gnomes with the mysterious allure of werewolves.

Thanks for joining us on this creative adventure, and may your Halloween be filled with delightful moments and DIY magic! Happy Howl-o-ween! 🎃🐺

YOU MIGHT ALSO LIKE

Make Your Own Viking Gnome: A Guide to Making a Norse Guardian (Free Pattern)

January 26, 2024

Crafting a DIY Vampire Gnome for Your Home! (Free Pattern)

January 26, 2024

Where to Find Materials and Tools

USA:

Hobby Lobby (www.hobbylobby.com): Hobby Lobby is a popular arts and crafts retailer offering a wide range of supplies for gnome making, including fabrics, felting materials, faux fur, and craft accessories.

Joann (www.joann.com): Joann is another well-known craft store that carries an extensive selection of materials for gnome crafting, such as felt, faux fur, pom-poms, and trims.

Canada:

DeSerres (www.deserres.ca): DeSerres is a leading art supply store in Canada, offering a variety of materials for gnome making, including felt, yarn, stuffing, and decorative accessories.

Michaels Canada (www.michaels.ca): Michaels also has a presence in Canada, providing a wide range of craft supplies suitable for gnome crafting, such as fabrics, felting kits, and embellishments.

UK:

Hobbycraft (www.hobbycraft.co.uk): Hobbycraft is a popular arts and crafts retailer in the UK, offering a comprehensive selection of supplies for gnome making, including felt, sewing notions, faux fur, and decorations.

The Range (www.therange.co.uk): The Range is a home and leisure retailer that carries various crafting materials, including fabrics, trims, yarns, and accessories suitable for creating gnomes.

Australia:

Spotlight (www.spotlightstores.com/au): Spotlight is a well-known craft and fabric store in Australia. They offer a range of supplies for gnome crafting, such as felt, sewing notions, faux fur, and decorative elements.

Riot Art & Craft (www.riotstores.com.au): Riot Art & Craft is a popular art supply store that stocks materials for various crafts, including gnome making. They offer items like felting kits, felt sheets, yarn, and embellishments.

New Zealand:

Spotlight (www.spotlightstores.com/nz): Spotlight also has stores in New Zealand, providing a range of crafting supplies suitable for gnome making, including felt, faux fur, sewing notions, and decorations.

The Warehouse (www.thewarehouse.co.nz): The Warehouse is a general merchandise retailer that offers a selection of craft supplies, including fabrics, trims, and other materials that can be used for gnome crafting.